NXAMP4×4

Profile information:

NXAMP technology is far more complex than a bundled power amplifier and loudspeaker controller. Significant DSP innovations allows multiple digital sense lines to protect at the same time the amplifier and the connected speakers.

basic information

编号:

NXAMP4×4

分类:

Power Amplifier

Release time:

2018-11-14

A key phone 020-81990009

产品描述

Main characteristics

> 4 balanced analog input channels, 3-pin cassette input block for link, using 24-bit (bit) converter. 4 digital input channels are input through the network interface of the EtherSound add-in card on the backplane.

>4 Speakon outputs, built-in relays are automatically wired according to system presets

> 2 DSPs with a speed of 700 MIPS (million instructions per second), 24-bit data width with 48-bit accumulator

Technical indicators:

Number of amplifier channels: 4 channels, each of which can be bridged

Maximum output voltage (no load): 4*200V

Maximum output power (8Ω): 4*1900W

Maximum output power (4Ω): 4*3400W

Maximum output power (2Ω): 4*4000W

Power consumption (standby): 20W

Power consumption (no signal): 150W

Power consumption (1/8 power): 3000W

Number of analog input channels: 4 channels, one 3-pin cassette output block for each analog channel.

Frequency response: 10Hz-20Hz ±0.5dB

Input impedance: 20KΩ

Maximum input level: +28dBu

Dynamic range: all channels = 105dB (without weighting)

Total harmonic distortion + noise: 0.1% in fully flat presets

Total line potential delay: 500μS in a fully flat preset

Power: 100-120 volt or 200-240 volt version

Dimensions: 4U, 19" wide instrument cabinet, 457mm (18" deep)

Weight: 24.5kg

The next article

NXAMP 4x1MK2